| Product | ★ |
| 270 Pieces Stainless Steel Watchband Spring Bar Pin Set (8mm to 25mm) (check at Amazon) | 4.5 |
| Two Stainless Steel Watchband Spring Bar Pins For Attaching Watch Band To Watches 16 mm $7.99 (check at Amazon) | 4.3 |
| New Two Stainless Steel Watchband Spring Bar Pins For Watch Band 22mm (check at Amazon) | 0.0 |
| SWISS REIMAGINED Stainless Steel Spring Bar Pins for Attaching Watch Band to Watches or Buckle (Set of Two) - 1.8mm Diameter (check at Amazon) | 4.2 |
| Two Stainless Steel Watchband Spring Bar Pins For Attaching Watch Band To Watches 26 mm - by JP Leatherworks (check at Amazon) | 4.5 |
| Two Stainless Steel Watchband Spring Bar Pins For Attaching Watch Band To Watches 25 mm (check at Amazon) | 4.2 |
| Two Stainless Steel Watchband Spring Bar Pins For Attaching Watch Band To Watches 14 mm $7.95 (check at Amazon) | 4.4 |
| Two Stainless Steel Watchband Spring Bar Pins For Attaching Watch Band To Watches 20 mm $7.99 (check at Amazon) | 4.1 |
| SWISS REIMAGINED Stainless Steel Spring Bar Pins for Attaching Watch Band to Watches or Buckle (Set of Two) - 1.5mm Diameter (check at Amazon) | 5.0 |
| Two Stainless Steel 1.5 MM Watchband Spring Bar Pins For Attaching Watch Band To Watches (check at Amazon) | 4.5 |
| Two Stainless Steel Watchband Spring Bar Pins For Attaching Watch Band To Watches 19 mm $4.43 (check at Amazon) | 4.1 |
| Yoption 2pcs Stainless Steel Watchband Spring Bar Pin Remover Tool for Watch Straps and Bands (check at Amazon) | 0.0 |
| Two Stainless Steel 1.5 MM Watchband Spring Bar Pins For Attaching Watch Band To Watches - 24 mm (check at Amazon) | 5.0 |
| Two Stainless Steel Watchband Spring Bar Pins For Attaching Watch Band To Watches 24 mm (check at Amazon) | 4.8 |
| Two Stainless Steel 1.5 MM Watchband Spring Bar Pins For Attaching Watch Band To Watches - 13 mm (check at Amazon) | 5.0 |
| Two Stainless Steel 1.5 MM Watchband Spring Bar Pins For Attaching Watch Band To Watches - 16 mm (check at Amazon) | 3.0 |
| Two Stainless Steel Watchband Spring Bar Pins For Attaching Watch Band To Watches 8 mm (check at Amazon) | 5.0 |
| Two Stainless Steel 1.5 MM Watchband Spring Bar Pins For Attaching Watch Band To Watches - 26 mm $6.85 (check at Amazon) | 3.0 |
| Two Stainless Steel 1.5 MM Watchband Spring Bar Pins For Attaching Watch Band To Watches - 22 mm $7.99 (check at Amazon) | 4.3 |
| Two Stainless Steel Watchband Spring Bar Pins For Attaching Watch Band To Watches 27 mm - by JP Leatherworks (check at Amazon) | 1.7 |
| Two Stainless Steel 1.5 MM Watchband Spring Bar Pins For Attaching Watch Band To Watches - 28 mm (check at Amazon) | 5.0 |
| Two Stainless Steel Watchband Spring Bar Pins For Attaching Watch Band To Watches 13 mm (check at Amazon) | 4.5 |
| Two Stainless Steel Watchband Spring Bar Pins For Attaching Watch Band To Watches 11 mm $6.99 (check at Amazon) | 4.5 |
| Two Stainless Steel Watchband Spring Bar Pins For Attaching Watch Band To Watches 17 mm (check at Amazon) | 4.8 |
| Two Stainless Steel Watchband Spring Bar Pins For Attaching Watch Band To Watches 12 mm (check at Amazon) | 2.0 |
| Two Stainless Steel Watchband Spring Bar Pins For Attaching Watch Band To Watches 15 mm (check at Amazon) | 0.0 |
| Two Stainless Steel Watchband Spring Bar Pins For Attaching Watch Band To Watches 10 mm (check at Amazon) | 0.0 |
| Two Stainless Steel Watchband Spring Bar Pins For Attaching Watch Band To Watches 23 mm (check at Amazon) | 0.0 |
| Two Stainless Steel Watchband Spring Bar Pins For Attaching Watch Band To Watches 28 mm - by JP Leatherworks (check at Amazon) | 0.0 |
| Two Stainless Steel Watchband Spring Bar Pins For Attaching Watch Band To Watches 29 mm - by JP Leatherworks (check at Amazon) | 0.0 |
workz
These pins are nice and strong. Nice price. I just wish I ordered the right size, my fault, but will hold on to just incase.
Good thick pins.
perfect fit
Quality replacements. Repaired the band.
…and nothing more. Decent quality, good springs, not easy to bend. Work exactly as you need them to. May be a little thick for some straps, but they can be forced in no problem.
OK
Does not fit my 20mm band for my invicta. I also measured it and it is 23mm and it does not fit. Do not buy if u have a watch with a 20mm band.
Very durable and fairly easy to use if you have a spring bar tool. Make sure they are the right diameter though.
The watchband spring bar pins arrived in two days and fit the watch perfectly. I’d use JP Leatherworks again.
The size is correct. It’s hard to tell how these will hold up, but at first glance the metal looks sturdier than the spring bars that came standard with my ESQ Movado watch, which I had to replace because of bending after about 5 years of wear.
Crappy quality, popped out after a few hours. I figured I put it in wrong, but tried again and they popped out again a few minutes later.
OK
nice, cheap fix
work
The pins seem to be sturdy and actually looked to be an improvement, but as it turns out they are slightly too short. It’s possible to get them set in place, but any slight amount of jostling will dislodge them. My watch is definitely 20mm, luckily the new strap did come with its own pins.
First-rate, quality pins.
Works as expected , a little thicker than the original pins but I think that is a good thing. I missed my watch.
great
The pins are almost too small, although the watch band has not fallen off yet it is very loose
Pins were not long enough to properly fit my Timex Expedition watch.
The part seems fine, but the 20 mm size doesn’t stay put in my 20 mm Timex. Perhaps I need a larger size or a Timex part.
This is a product where the item either works or it doesn’t, it’s five star or one star. in this case, these pins most certainly work. I used them on a new watch band that didn’t come with provided pins. These pins looked correct and fit perfectly. The springs were very strong and should hold my new watch band securely to my watch for years to come. Five stars.
These appear to be superior quality compared with many of the other pins available on Amazon. However, that quality is also reflected in the thicker shafts which were unable to fit the band of my Seiko Titanium 100 watch. My mistake though as I’d not measured the whole diameter before purchasing and the pin diameter is clearly stated on the posting.
They shipping package contained a single small plastic resealable bag in which were the two pins. Packaging was fine and I was also happy with the prompt delivery through Prime.
Fit was good. Easy to install.
Didn’t last a even year! Both posts broke in half a month apart and had to be replaced. This time I purchased a different brand.
I purchased these to fix one of my invicta watches. Upon receiving this I realize that these are too small and will not work. I am disappointed due to the fact it would in essence cost more to send it back and get the right size then just to outright buy the correct size due to having to pay to ship the item back. Don’t buy if you have invicta’s.
Needed to fix my watch. These pins did the job they for which they were purchased and so far with no further problem.
Sweet and simple review: Strong, quality bar pins. A watch tool would have been useful to be included to pop them in but still worth the effort based on price.
I bought these to replace a broken pin in my current watch. These appeared to be a bit thicker, and hopefully stronger than the original. I decided to replace the other (non-broken) pin as well.
They’re simple little things. Not much to talk about, works fine and that’s that! Would order these again without hesitation. Be wary of complaints on these, most complaints I saw had more to do with the individual retailer than the product itself. That goes for anything on amazon.
Just got only one bar. I don’t know why! Very very disappointed! They should seal those bars to keep them safe!
Great watchband spring. It fits snugly. It works well with my watch. Made from excellent material. I will buy more if needed for other watches. Thanks!
My watch, now three years old with a leather band started to deterioate and the springs were lose so I gave these a try. Fit as expected and the price compared to a local shop beat it hands down!
Worked great in replacing the Pins on my Citizen watch. So far has held up very well and I recommend changing them every time you replace your watch band.
These are exactly what they say they are. They fit a 20mm Watch band, and seem sturdy enough. I’ve only used them for a few weeks, but they haven’t broken yet. I can’t speak to their long-term durability.
These replacement watch band pins are great. They fit as they should. Have not had the watch band come off since I put them in.
Ordered a new watch band but the description said nothing about including spring bars. Glad I bought them as the old ones were a bear to remove and……..zing…….one flew across the room. New ones quickly slid into new band and voila! Just like a new watch.
Good one. serves the purpose. good quality. but $4 is too much for this item. I didnt wanted to do a research on watch pins.
will be ordering more of these soon for other watches i need to get fixed up. good quality, strong as all get out.
It doesn’t fit my Invicta with metal band/clap. The pin is too thick for that metal band. I guess I bear some responsiblity for purchasing a product that does not fit so take that into consideration when evaluating my poor rating.
The product looks ok otherwise. These is no way for me to assess its quality considering…
A stronger pair of pins than the originals, might outlast the band. Perfect fit for 20mm watches. Ordering an extra set for my other watch.
didn’t work for my watch, so had to return with band………size just did not match up for what i needed
Although I cannot figure out how to tell ahead of time, these pins are too thick to fit into my watchband, so they are useless to me.
I keep my watches for many years–at least, I try to. Sometimes the watch bands need replacing.It’s no longer like years ago where you \\”had to\\” purchase a generic replacement watch band–now (because of companies like amazon.com) you can shop by brand names.Many times during the watch band changeover process,the watchband spring bar pins would get bent or they would be launched somewhere and lost.In changing the watchbands,I found the Paylak TSJX1327 watch case opener extra large repair kit to be a Godsend.It,too,is sold on amazon.com.It has a straight metal tool and on one end is a 2 pronged fork that makes removal and re-placement of the steel spring bar pins a snap.It \\”used to\\” take me about a 1/2 hour to do this and most times I wasn’t successful!The pins would get bent or lost!This same straight tool has measured markings so you can tell what size (length) watchband spring bar pins you’ll need.The order arrived very fast–along with the Timex Expedition watch band in the same shipping box.That’s the 2nd identical Timex watchband that I purchased from this seller–very nice quality!
Good quality stainless steel spring bars. Work as they should. Make sure you have the right size on your watch for these.
I bought them in case I needed them with a replacement band. Turned out the ones I took off the old one were fine, I didn’t destroy or lose them, and didn’t need these after all. I guess they’ll just go into inventory…
Not much to these, they either work or they don’t. They were cheap, made my watch useful again because it could hold a band on.
The circumference of the pin is too big for my watch. I am using it for a rubber strap Armani watch. The length is fine. Maybe the product should have some more information about the width/circumference. But I realize that it is my watch that is at fault.
Other than the fact that this product is not entirely \\”universal\\” it is decently made. The springs are nice and rigid. The overall quality of the metal material isn’t up to the grade of my original pin but it is just a pin afterall and a inexpensive replacement at that.
How do you review a watch band pin? You can’t even see them when properly installed. Either they work as they are supposed to and hold the watch on your wrist or they don’t and the watch falls off your wrist. My watch hasn’t fallen off my wrist so they must work.
I would recommend you always replace the pins when you replace a watch band. In my opinion every watch band should automatically come with two new pins. My old ones were bent but I didn’t know it until I took the old watch band off to put the new one on.
Just a couple of 20mm spring bar pins for a watch. I change bands once in a while from a metal to a nylon velcro band so I figured at one point I’d destroy one of these switching between the bands. Needless to say they have held up admirably. Pretty inexpensive to have a few spares lying around just in case.